-->

Type something and hit enter

By On
advertise here
 DIY step, change the screen parts of iPhone 6 -2

If your beloved iPhone 6 screen suffers some physical damage and its screen is shunned beyond recognition, there is no need to waste the time to replace it. But there are a couple of things to keep in mind.

If you already purchased Apple Care & # 39 ;, the DIY option is not for you. Movement for self-replacement of the screen will invalidate the terms of consent and can not take advantage of Apple Care & # 39; However, it does not matter whether iPhone 6 is still covered under warranty. Because there is no type of physical or water damage to be covered under warranty at all.

Considering these factors, it helps to decide whether or not to proceed. Make sure you are purchasing the original Apple iPhone 6 screen and its alternate tool. Here are some simple DIY steps given here to guide you to iPhone 6 screen replacement.

• Use the pentabine screwdriver to remove the lower screw and start the process. When these screws are removed, the screen will loosen.

• To remove a broken screen, you can use an iSlack device, which is a sucker designed for that purpose. However, it is necessary to detach the screen midway using iSlack, and the rest must be removed only after removing various cables and connectors.

• Remove the PCB connector plate and the connector cable. This process follows the removal of earphones, cameras, proxy sensors, light sensors, and microphone flex assemblies.

• When removing such assemblies and connectors, be careful that most of them are glued and stronger strength may damage the components.

• Focus on removing the home button assembly and the home button itself. This button is glued to the flex assembly fitted to the screen. To avoid this type of damage, you need to remove it soft.

• Carefully remove all of these parts and then locate the LCD backplate with seven adjacent Phillip screws next to it.

Removing the old LCD backplane allows you to install a new screen and carefully place all the components in the order they were removed. When reinstalling all the components it is a good idea to write down the entire sequence process so that you can refer to the notes and avoid mistakes.

Also, for help and guidance, you can watch online video and know what to do when exchanging iPhone screen parts. It's a fairly simple process, but you need to be aware of it throughout the process. We recommend you do it in one uninterrupted session.




 DIY step, change the screen parts of iPhone 6 -2


 DIY step, change the screen parts of iPhone 6 -2

Click to comment