Consumers powerboard safety information
The state fire brigades and emergency services are frequently reminding consumers to use powerboards safely. In fact, many people fires are caused by the misuse of power boards by people overloading them and exceeding the manufacturers recommended rating.
The will utilize the power boards in homes confirm these people. You will find most people unaware of the risks of the risks of the risk boards of electricity has the potential to kill people if proper care is not adhered to, because the reason why some simple steps should be below when connecting electrical appliances to powerboards.
Often people will overload the powerboards with too many devices, for example, when connecting the electric heater, computer and its Therefore heaters can not draw big currents such as 3.6 Amps at times. Therefore it does not take much for the powerboard rating to be reached.
For example, the PCs internal power supply wattage has steadily increased over the years to cope.
While most people would not realize the unseen risks they created overloading power boards and not have adequate overload protection. Ensure your powerboard has good ventilation nearby and not covered - up causing unnecessary heat build - up.
People will try to charge their USB socket, however at times the PC has not enough power to do so, ie iPad will often not recharge via a PC USB from of limited power available for recharging purposes. Therefore charge the device via the adapter supplied by Apple to a suitable power outlet.
Safety guidelines:
Do not
Do not overload the powerboard with too many big current consuming electrical appliances, for example, heaters draw big current
Do not exceed the manufacturer & # 39; s voltage and current rating, for example 10 Amps and 240 V
Do not use double adapters on the powerboard
Do not position the powerboard in hot areas, for example, avoid placing near heater and sunny hot glass window
Do not join or connect powerboards together, for example, no daisy-chains
Do not use a thinner extension cable before powerboard
Do not locate near water or moisture
Do
Keep adequate ventilation near powerboards to reduce heat build-up
Keep young children away and out of reach
Check rating of the electrical appliances before connection to powerboards
Ensure the combined total Amps (current) consumption of appliances does not exceed the Amps (current) of the powerboard
Buy a powerboard with overload protection and surge protection
Buy powerboards with individually switched outputs and wide spacing for power packs
Visually and physically inspect powerboards for damage regularly
Turn off appliances at power board and power point switch when not in use
Only use powerboards designed to meet Australian Electricity Standards
Conclusion
The surge protected powerboards have to short over.. Repeatedly performing inspections and operating power buttons will button replacement button will help determine if the power board is due for replacement.
Remember your meter box generally is located outside of the promises, and easy to follow safety guidelines. will have a circuit breaker you can turn off the electricity till a licensed electrician concerns theory.
Such as an electrician That opportunity inspection, testing and tagging methods.
For more information information contact the nearest Government Authority is for in situ changing conditions, for example exposure to moisture, heat, vibration, mechanical damage, corrosive chemicals or dust, a safety inspection and testing electrical equipment is required in places of work. for workplace safety.
