Is water on the laptop broken? Do not you have time to send to the laptop repair center? please do not worry. It takes 10 minutes to fix it.
If the water is broken in the laptop computer, the lifespan of the laptop computer will never end. You can easily fix according to the following laptop repair procedure.
What you need:
Hand disinfectant
Toothbrush
air compressor
Driver
1. Turn off the notebook computer
2. Do not remove the battery and do not press the power button.
3. Use a screwdriver to remove all screws under the laptop so that you can access the motherboard and internal hardware.
4. Gently remove all of the top side including the keyboard. Make sure that all the bottom screws have been removed or damage the laptop when pulling out all.
5. Remove the keyboard and check for water drops. (It looks like white spots, but check the hardware if correlation marks are visible)
6. Remove all screws connected to the internal hardware and check all spots for water and corrosion.
7. If water spots or corroded parts are visible, please gently remove the affected hardware.
8. Place the hand cleaning agent on the toothbrush and use it to wipe the water spot. Please do not use hand sanitizer too much. As it evaporates quickly, please put in enough amount.
9. Use an air compressor in a place difficult to reach, and wipe it off with a toothbrush later.
10. Also make sure there is no water droplet on the hardware connector.
11. Replace the hardware and connectors, and check that the connection is not loose after the cleaning is completed.
12. Install the top of the laptop and keyboard.
13. Return everything including the lower screw.
14. Install the battery and turn on the power. Actually it is less than 10 minutes.
This is a brief explanation and, hopefully, it can help you as a laptop repair guide. But you can learn more by actually watching it on video.
