The broken foundation is very worrying for the homeowner - especially if you think there is a danger that the walls will bend, buckle, or enter the cave.
Given the appearance of the foundation wall, many homeowners assume that the only safe and effective solution at home is to remove the damaged wall and replace it with a newly constructed wall. However, even in extreme cases, homeowners may have several choices for restoring the foundation.
Case for Foundation's alternative plan
Generally speaking, replacing the foundation involves a long, expensive and invasive process in your home. Firstly, it is necessary to completely uncover the original foundation to expose the foundation wall. Next, while the floor slab and foundation wall are removed, the house needs to "jack up" on temporary support. A new foundation is built, the floor is loved, and finally you can try to restore the landscaping.
The worst part of this problem was all the time, confusion, cost, the problem that initially caused damage, that is, it was not your foundation soil. Without solving this problem, the possibility that the new foundation will be damaged by the same problem as hurting the first one is very high.
Four foundation wall repair solutions
If the wall is still standing there is a wonderful opportunity to repair without requiring wall replacement. Repair options are as follows.
Carbon Fiber Strip: This is the best solution for home if the foundation wall is bulging in the middle and not tilted up or inward along the bottom. These strips of carbon fiber cloth can be quickly and easily epoxidized along the foundation wall by the foundation contractor. They are many times stronger than steel and can be installed year-round, making it ideal for reinforcing Boeing foundation walls.
One of the great advantages of carbon fiber strips is their low profile design. If you are planning to paint or finish the foundation after repairing the wall, it is a reliable and inexpensive solution for preparing wall board and stud walls.
Foundation wall anchor: If you want to have the opportunity to straighten the foundation wall straight back to its original straight position, if you are outside the home, this is the solution you are looking for. The wall anchor is a three piece system including a wall plate attached to the visible side of the underground wall, a wall anchor in the soil, a steel rod connecting the plate, the anchor wall board grasps the base wall, and the anchor Will sit in the soil and hold it in place. Then, each wall plate is clamped on the connecting rod and pressed against the foundation wall to stop all inward movement.
As time goes by, this option not only reinforces the foundation wall, it can be used to gradually straighten the wall to its original position. Since studs and wall boards can be attached easily to thin wall boards, they can be painted on the underground finish or used in conjunction with underground finishing. Also, unlike the installation of carbon fiber strips, wall anchors can be used to support walls that signal inclined along the top or inside, and can slide along the bottom.
I Beam System: You can not get in and out of your home, but if you need to repair a wall that is tilted up or sliding inside down, this is what your system is looking for. The system consists of iron "I" shaped beams spanning the distance between the concrete floor and the floor beam along the underground upper part. These steel braces are installed at intervals along the wall and stop all inward movement.
Most I-beam systems only stop the movement of the wall, but rare ones can also adjust the walls straight. In addition, these systems are least compatible with the finished basement and take space along the wall. The best system is designed using corrosion-resistant galvanized steel, so it will not be an obtrusive as the years go by.
Shotcrete Sister Walls: Even if the wall collapses, collapses, or gives extreme damage, there is a possibility that the replacement of the foundation is not necessary yet. Instead, you can build a sister's wall in front of the original wall using spray-on concrete, which is known as shotcrete in the industry. This sister's wall is effective when used in combination with wall anchor system. Make sure that the new wall does not collapse from the pressure that damaged the original wall.
This system is installed year-round, much faster than replacement exchanges, and does not interfere with landscaping. It is cheap and easy. A superior contractor is suitable to provide warranty in a completed installation.
Hire a California specialized foundation contractor
If you plan to sell your home in the future, telling your future buyers that your foundation has been repaired by a reputable contractor will be your major selling point. If the contractor is still open and the installation includes written and transferable warranty, you will also get sales advantages.
